Explore Products

Traditional Dhokra Crafts from Tribals of Chhattisgarh, India

  Exclusive

  Traditional

  Mixed Metals

  Decorative

  Frames

  Ritualistic

  Utilities

  Tribal Sculptures

  Mythological Figures

  Decorative Items

  Arts Frames

  Animal Statues

 

 

Dhokra Manufacturing
Manufacturing Process
Dhokra Craft
About Chhattisgarh

Dhokra Manufacturing Process

 

The traditional lost wax technique is simple and ideal for use in tribal settings. The craftsman begins by winding a slim thread of wax over the contours of a clay core . It is then thickly coated with fine clay obtained from termite bills, and baked on drying leaving a narrow vent to melt away the wax. The vacuum created between the core and the clay layer is filled with molten metal, which is then allowed to cool down and solidify. The moment that follows is loaded with anticipation, for it is then that the outer clay mould is cracked open, revealing the beauty of the final sculpture. Simple as this whole process seems, it requires great precision and skill. The metal must be able to flow uniformly and freely through the narrow spaces, and replace the wax without forming any bubbles or gaps.

Cow dung, paddy busk and red soil are also used in the manufacture of DHOKRA artifacts. However, of all the raw materials used by the GHADWAS, the most important is beeswax. Besides the essential contouring, wax wires and pieces are also used because of its extraordinary high plastic content and pliability, generating a rudimentary but powerful stimulus for the intensive design and faculties of the artisans.

Examples of the lost wax casting (also known as 'cire perdue') are found across the globe, but the coiled thread technique is unique to Bastar, Chhattisgarh. A glance at the traditional baskets provides a clue to its origin. The basket makers would wind grass around a rope, which was then coiled into shape. The same technique was translated into metal only much later, which forest dwellers being dependent on natural products like Nandi, Horse, Elephant, Ganesha, Candle holder, Candle stand long before they began to use metal. Metal anklets with basket weave motifs, and beautiful containers reminiscent of wicker baskets also point towards such a transition.

1. Woman of the household powder and sieve the black clay or kali maati

2. The clay is kneaded with rice husk

   

3. A composite mould is made by applying layers of soil soil mixes and drying it in the sun.

4. Thin strands of bees wax are extruded through a PICHKI with the help of a THASSA

   

5. The strands of bees wax emerging from the PICHKI

6. The mould is coated with the sticky juice of the leaves of green beans called SEM.

   

7. The clay mould is wrapped completely with wax strands.

8. Thick and thin strands are used to create embellishments. A wooden spatula is used to flatten the strands so as to smoothen the background and highlights the decoration.

   

9. The mould is covered with a layer of clay, sawdust and charcoal. On drying a second layer of clay is applied and then a final layer of DENGUR clay and rice husk

10. The mould is baked at 1100 Degrees Celsius. This melts the wax and creates a fine cavity between the layers of clay

   

11. Metal is melted and pored into the cavity. The molten metal flows through the space and takes on the impression of the walls of the clay mould

12. The mould is allowed to cool for two to three hours and is frequently sprinkled to with water, This hastens the cooling process and softens the mould for breaking.

   

13. The mould is broken, followed by filling and brushing of the artifact.

14. Finished product after polishing and buffing is ready to display.

 

 

All Rights Reserved to Bastar Arts. Powered by Mavenheads

Home | About Us | Products | Support | Enquiry | Wholesalers | Contact | Resources | Why Us